Add your seminar reports to this blog

Add your civil engineering seminar reports to the top civil engg seminar blog and let the world see it. Contact for more details and send your report to:
premmohantkmce@yahoo.in
Moreover, you can get paid when the pageviews of your report reach a threshold limit.

Saturday, September 17, 2011

SIGNIFICANCE OF NANOTECHNOLOGY IN CONSTRUCTION ENGINEERING

                            
1.   INTRODUCTION
                   Nanotechnology is one of the most active research areas that include a number of disciplines including civil engineering and construction materials. Nanotechnology is the understanding, control, and restructuring of matter on the order of nanometers (i.e., less than 100 nm) to create materials with fundamentally new properties and functions. Nanotechnology encompasses two main approaches: (i) the ‘‘topdown” approach, in which larger structures are reduced in size to the nanoscale while maintaining their original properties or deconstructed from larger structures into their smaller, composite parts and (ii) the ‘‘bottom-up” approach, also called ‘‘molecular nanotechnology” or ‘‘molecular manufacturing,”  in which materials are engineered from atoms or molecular components through a process of assembly or self-assembly. Traditionally nanotechnology has been concerned with developments in the fields of microelectronics, medicine and material sciences. However the potential for applications of many developments in the nanotechnology field in the area of construction engineering is growing. The evolution of technology and instrumentation as well as its related scientific areas such as physics and chemistry is making the nanotechnology aggressive and evolutional. There are many potential areas where nanotechnology can benefit construction engineering like its applications in concrete, structural composites, coating materials and in nano-sensors, etc. Nanotechnology products can be used for design and construction processes in many areas. The nanotechnology generated products have unique characteristics, and can significantly fix current construction problems, and may change the requirement and organisation of construction process. The recent developments in the study and manipulation of materials and processes at the nanoscale offer the great prospect of producing new macro materials, properties and products. But till date, nanotechnology applications and advances in the construction and building materials fields have been uneven. Exploitation of nanotechnology in concrete on a commercial scale remains limited with few results successfully converted into marketable products. The main advances have been in the nanoscience of cementitious materials with an increase in the knowledge and understanding of basic phenomena in cement at the nanoscale.
2. APPLICATIONS OF NANOTECHNOLOGY   IN CONSTRUCTION

          2.1. NANOTECHNOLOGY AND CONCRETE

                   Concrete, the most ubiquitous material in the world, is a nanostructured, multi-phase, composite material that ages over time. It is composed of an amorphous phase, nanometer to micrometer size crystals, and bound water. The amorphous phase, calcium–silicate–hydrate (C–S–H) is the ‘‘glue” that holds concrete together  and is itself a nanomaterial. Viewed from the bottom-up, concrete at the nanoscale is a composite of molecular assemblages, surfaces (aggregates, fibres), and chemical bonds that interact through local chemical reactions, intermolecular forces, and intraphase diffusion. Properties characterizing this scale are molecular structure; surface functional groups; and bond length, strength (energy), and density. The structure of the amorphous and crystalline phases and of the interphase boundaries originates from this scale. The properties and processes at the nanoscale define the interactions that occur between particles and phases at the microscale and the effects of working loads and the surrounding environment at the macroscale. Processes occurring at the nanoscale ultimately affect the engineering properties and performance of the bulk material.
                 There are two main avenues of applications of nanotechnology in concrete research;the nanoscience and nano-engineering. Nanoscience deals with the measurement and characterization of the nano and microscale structure of cement-based materials to better understand how this structure affects macroscale properties and performance through the use of advanced characterization techniques and atomistic or molecular level modeling. Nano-engineering encompasses the techniques of manipulation of the structure at the nanometer scale to develop a new generation of tailored, multifunctional, cementitious composites with superior mechanical performance and durability potentially having a range of novel properties such as: low electrical resistivity, self-sensing capabilities, self-cleaning, self-healing, high ductility, and self-control of cracks. Concrete can be nano-engineered by the incorporation of nanosized building blocks or objects (e.g., nanoparticles and nanotubes) to control material behavior and add novel properties, or by the grafting of molecules onto cement particles, cement phases, aggregates, and additives (including nanosized additives) to provide surface functionality, which can be adjusted to promote specific interfacial interactions.
                      At the basic science level, much analysis of concrete is being done at the nano-level in order to understand its structure using the various techniques developed for study at that scale such as Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB). This has come about as a side benefit of the development of these instruments to study the nanoscale in general, but the understanding of the structure and behaviour of concrete at the fundamental level is an important and very appropriate use of nanotechnology. One of the fundamental aspects of nanotechnology is its interdisciplinary nature and there has already been cross over research between the mechanical modeling of bones for medical engineering to that of concrete which has enabled the study of chloride diffusion in concrete (which causes corrosion of reinforcement). Concrete is, after all, a macro-material strongly influenced by its nano-properties and understanding it at this new level is yielding new avenues for improvement of strength, durability and monitoring.
                                 
                             Crystallised C-S-H                          Atomic resolution
                                    2*2 µm²                                          20*20 nm²


Fig  2.1. Nanoscale structure of C-S-H crystallized on calcite substrate and revealed by AFM

                  ( from the American Ceramic Society Bulletin, 2005, Vol. 84 ).              

                 
                Nano-engineering, or nanomodification, of cement is a quickly emerging field. Synthesis and assembly of materials in the nanometer scale range offer the possibility for the development of new cement additives such as novel superplasticizers, nanoparticles, or nanoreinforcements.  These techniques can be used effectively in a bottom-up approach to control concrete properties, performance, and degradation processes for a superior concrete and to provide the material with new functions and smart properties not currently available. Engineering concrete at the nanoscale can take place in one or more of three locations: in the solid phases, in the liquid phase, and at interfaces, including liquid–solid and solid–solid interfaces. While nano-engineering of cement-based materials is seen as having tremendous potential, nonetheless, several challenges will need to be solved to realize its full potential, including the proper dispersion of the nanoscale additives, scale-up of laboratory results and implementation on larger scale, and a lowering of the cost benefit ratio. 

2.1.1. Addition of nanosized and nano-structured materials                    
                      Nanosized particles have a high surface area to volume ratio, providing the potential for tremendous chemical reactivity. Much of the work to date with nanoparticles has been with nano-silica (nano-SiO2) and nano-titanium oxide (nano-TiO2) .There are a few studies on incorporating nano-iron (nano-Fe2O3), nano-alumina (nano-Al2O3) , and nanoclay particles . Additionally, a limited number of investigations are dealing with the manufacture of nanosized cement particles and the development of nanobinders . Nanoparticles can act as nuclei for cement phases, further promoting cement hydration due to their high reactivity, as nanoreinforcement, and as filler, densifying the microstructure and the ITZ, thereby, leading to a reduced porosity. The most significant issue for all nanoparticles is that of effective dispersion. Though it is particularly significant at high loadings, even low loadings experience problems with self-aggregation, which reduces the benefits of their small size and creates un-reacted pockets leading to a potential for concentration of stresses in the material.
          Nano-SiO2 has been found to improve concrete workability and strength, to increase resistance to water penetration, and to help control the leaching of calcium, which is closely associated with various types of concrete degradation. Nano-SiO2, additionally, was shown to accelerate the hydration reactions of both C3S and an ash–cement mortar as a result of the large and highly reactive surface of the nanoparticles. Nano-SiO2 was found to be more efficient in enhancing strength than silica fume. Addition of 10% nano-SiO2 with dispersing agents was observed to increase the compressive strength of cement mortars at 28 days by as much as 26%, compared to only a 10% increase with the addition of 15% silica fume. Even the addition of small amounts (0.25%) of nano-SiO2 was observed to increase the strength, improving the 28 day compressive strength by 10% and flexural strength by 25%. It was noted that the results obtained depended on the production route and conditions of synthesis of the nano-SiO2 (e.g., molar ratios of the reagents, type of reaction media, and duration
of the reaction for the sol–gel method) and that dispersion of the nano-SiO2 in the paste plays an important role. Nano-SiO2 not only behaved as a filler to improve the microstructure but also as an activator to promote pozzolanic reactions .


Fig 2.2  Spherical nano-SiO2 particles of uniform distribution observed using TEM( of size 20 nm and 100 nm)

 (Courtesy of I. Flores and E.L. Cuellar)
     

                Nano-TiO2 has proven very effective for the self-cleaning of concrete and provides the additional benefit of helping to clean the environment. Nano-TiO2 containing concrete acts by triggering a photocatalytic degradation of pollutants, such as NOx, carbon monoxide, VOCs, chlorophenols, and aldehydes from vehicle and industrial emissions. ‘‘Self-cleaning” and ‘‘de-polluting” concrete products are already being produced by several companies for use in the facades of buildings  (e.g., the Jubilee Church in Rome, Italy). In addition to imparting self-cleaning properties, a few studies have shown that nano-TiO2 can accelerate the early-age hydration of Portland cement, improve compressive and flexural strengths, and enhance the abrasion resistance of concrete. However, it was also found that aging due to carbonation may result in loss in catalytic efficiency.

Fig 2.3. Building made by using self-cleaning concrete (Church ‘‘Dives in Misericordia”, Rome, Italy)

 ( from Construction and Building Materials 25 (2011), 587)


                 Nano-Fe2O3 has been found to provide concrete with self-sensing capabilities as well as to improve its compressive and flexural strengths.  Nano-Al2O3 has been shown to significantly increase the modulus of elasticity (up to 143% at a dosage of 5%) but to have a limited effect on the compressive strength. Nanosized cement particles and nanobinders have been proposed as a way to improve cement performance while reducing carbon emissions. Cement pastes made with nanosized cement particles have shown faster setting times and an increase in early compressive strength compared to pastes prepared with common. The concept of a nanobinder involves mechano-chemical activation that is obtained by inter-grinding cement with dry mineral additives in a ball mill. Mechano-chemical modification of cement with high volumes of blast furnace slag has been shown to increase the compressive strength by up to 62%.
                    Nanoclay particles have shown promise in enhancing the mechanical performance, the resistance to chloride penetration, and the self-compacting properties of concrete and in reducing permeability and shrinkage. Natural clay particles are micron and sub-micron in size, and the base structure of clay is composed of crystalline layers of aluminum phyllosilicates with thicknesses on the order of 1 nm. Chemical binding of PVA (polyvinyl alcohol) to exfoliated clay particles recently has been proposed to create linked clay particle chains that, when incorporated in cement, were shown to improve the post-failure properties of the material.

2.1.2 Use of Nanoreinforcements
                  Carbon nanotubes/nanofibers (CNTs/CNFs) are potential candidates for use as nanoreinforcements in cement-based materials. CNTs/CNFs exhibit extraordinary strength with moduli of elasticity on the order of TPa and tensile strength in the range of GPa, and they have unique electronic and chemical properties.
CNTs/CNFs, thus, appear to be among the most promising nanomaterials for enhancing the mechanical properties of cement-based materials and their resistance to crack propagation while providing such novel properties as electromagnetic field shielding and self-sensing. Single-wall CNTs (SWCNTs), multi-wall CNTs (MWCNTs), and CNFs are highly structured graphene ring-based materials with very large aspect ratios (of 1000 or more) and very high surface areas. SWCNTs are single graphene cylinders and MWCNTs are multiple, concentric graphene cylinders coaxially arranged around a hollow core. Unlike CNTs, CNFs present numerous exposed edge planes along the surface that constitute potential sites for advantageous chemical or physical interaction. Compared to CNTs, vapor grown CNFs have a lower production cost (about 100 times lower than SWCNTs ) and are suitable for mass production. While CNTs/CNFs have been extensively studied in polymeric composites, their use in cement has, to date, remained limited. Most research efforts have focused on CNTs compared to CNFs and have been performed on cement pastes. One of the main challenges is the proper dispersion of CNTs/CNFs into cement paste, partly due to their high hydrophobicity and partly due to their strong self-attraction. Incorporating the unique mechanical properties of CNTs/CNFs in cement composites has proven to be rather complex and to date mixed results have been obtained. A number of methods have been investigated to improve dispersion and to activate the graphite surface in order to enhance the interfacial interaction through surface functionalization and coating, optimal physical blending, and the use of surfactant and other admixtures.


Fig 2.4 Crack bridging observed in cement-CNT composites.
( from the proceedings of ‘‘The 3rd International Conference on Construction Materials:Performance, Innovations and Structural Implications”)



                                 Fig  2.5. Graphite sheets of nanotubes

                 CNTs can affect early-age hydration and that a strong bond is possible between the cement paste and the CNTs. Their dispersion process consisted of sonication in isopropanol followed by cement addition, evaporation, and grinding, which produced cement particles coated with CNTs. Both MWCNTs and SWCNTs, when added to cement paste as a pre-mix with gum Arabic (a water-soluble gum used as a dispersing agent), were shown to increase the Young’s modulus and hardness. But the mechanical properties got worsen when no dispersing agent was added. When MWCNTs was introduced as a water suspension with added surfactant admixtures , did not increase the compressive and bending strengths, though good dispersion was obtained. They also found the bonding between the MWCNTs and the cement matrix to be very weak, where, under tension, the MWCNTs were easily pulled off the matrix. But the combination of MWCNTs with polyacrylic-acid polymers found improved dispersion, good workability, and increased compressive strength. In mortar, a study using untreated CNTs and CNTs pre-treated with sulfuric and nitric acid found an increase in compressive strength up to 19% and in flexural strength up to 25% and that CNTs can decrease the electrical resistivity and improve the pressure sensitive properties of mortars. Oxidized multi-walled nanotubes (MWNT’s) show the best improvements both in compressive strength (+ 25 N/mm²) and flexural strength (+ 8 N/mm²) compared to the reference samples without the reinforcement. It is theorized the high defect concentration on the surface of the oxidized MWNTs could lead to a better linkage between the nanostructures and the binder thus improving the mechanical properties of the composite rather like the deformations on reinforcing bars. However, two problems with the addition of carbon nanotubes to any material are the clumping together of the tubes and the lack of cohesion between them and the matrix bulk material. Due to the interaction between the graphene sheets of nanotubes, the tubes tend to aggregate to form bundles or “ropes” and the ropes can even be entangled with one another. To achieve uniform dispersion they must be disentangled. Further more due to their graphite nature, there is not a proper adhesion between the nanotube and the matrix causing what it is called sliding. An alternative approach was recently developed by Cwirzen et al. for a hybridized Portland cement that incorporated CNTs and CNFs grown in situ on the cement particles using a modified chemical vapor deposition method. The resulting hybrid cement, called Carbon Hedge Hog (CHH), allows for a composite containing up to 20% CNTs/CNFs. No significant change in the flexural strength was found; however, the electrical conductivity was increased by one order of magnitude. The cost of adding CNT’s to concrete may be prohibitive at the moment, but work is being done to reduce their price and at such time the benefits offered by their addition to cementitious materials may become more palatable.
                  
Fig.2.6  Carbon nanotubes: right schematics; left microstructure
                     
                        (from Construction and Building Materials 25 (2011), 583)


2.2. NANOTECHNOLOGY IN STRUCTURAL COMPOSITES

2.2.1. Applications in Steel Structures, joint and welds
                       Fatigue is a significant issue that can lead to the structural failure of steel subject to cyclic loading, such as in bridges or towers. This can happen at stresses significantly lower than the yield stress of the material and lead to a significant shortening of useful life of the structure. The current design philosophy entails one or more of three limiting measures: a design based on a dramatic reduction in the allowable stress, a shortened allowable service life or the need for a regular inspection regime. This has a significant impact on the life-cycle costs of structures and limits the effective use of resources and it is therefore a sustainability as well as a safety issue. Stress risers are responsible for initiating cracks from which fatigue failure results and research has shown that the addition of copper nano particles reduces the surface unevenness of steel which then limits the number of stress risers and hence fatigue cracking. Advancements in this technology would lead to increased safety, less need for monitoring and more efficient materials use in construction prone to fatigue issues.
                       Current research into the refinement of the cementite phase of steel to a nano-size has produced stronger cables. High strength steel cables, as well as being used in car tyres, are used in bridge construction and in pre-cast concrete tensioning and a stronger cable material would reduce the costs and period of construction, especially in suspension bridges as the cables are run from end to end of the span. Sustainability is also enhanced by the use of higher cable strength as this leads to a more efficient use of materials
                        High rise structures require high strength joints and this in turn leads to the need for high strength bolts. The capacity of high strength bolts is realized generally through quenching and tempering. When the tensile strength of tempered steel exceeds 1,200 MPa even a very small amount of hydrogen embrittles the grain boundaries and the steel material may fail during use. This phenomenon, which is known as delayed fracture, has hindered the further strengthening of steel bolts and their highest strength has long been limited to somewhere around 1,000 to 1,200 MPa. Research work on vanadium and molybdenum nano particles has shown that they improve the delayed fracture problems associated with high strength bolts. This is the result of the nano particles reducing the effects of hydrogen embrittlement and improving the steel micro-structure through reducing the effects of the inter-granular cementite phase.
                     Welds and the Heat Affected Zone (HAZ) adjacent to welds can be brittle and fail without warning when subjected to sudden dynamic loading, and weld toughness is a significant issue especially in zones of high seismic activity. The current design philosophies include selective weakening of structures to produce controlled deformation away from brittle welded joints or the deliberate over-sizing of structures to keep all stresses low. Research has shown that the addition of nanoparticles of magnesium and calcium makes the HAZ grains finer (about 1/5th the size of conventional material) in plate steel and this leads to an increase in weld toughness. This is a sustainable as well as a safety issue, as an increase in toughness at welded joints would result in a smaller resource requirement because less material is required in order to keep stresses within allowable limits.
                      Although carbon nano tubes (CNT’s) have tremendous properties of strength and stiffness, they have found little application as an addition to steel as their inherent slipperiness (due to their graphitic nature) makes them difficult to bind to the bulk material and they pull out easily, rendering them ineffective. In addition, the high temperatures involved in steel manufacture and the effects of this on CNT’s presents a challenge for their effective use as a composite component.

2.2.2.  Nano-composites            
                       Two relatively new products that are available today are Sandvik Nanoflex (produced by Sandvik Materials Technology) and MMFX2 steel (produced by MMFX Steel Corp). Both are corrosion resistant nano-composite, but have different mechanical properties and are the result of different applications of nanotechnology.
                         The modern construction requires steel of high strength and ductility. This has led to the use of low strength ductile material in larger sizes than would otherwise be possible with high strength brittle material and consequently it is an issue of sustainability and efficient use of resources. Sandvik Nanoflex has both the desirable qualities of a high Young’s Modulus and high strength and it is also resistant to corrosion due to the presence of very hard nanometre-sized particles in the steel matrix. It effectively matches high strength with exceptional formability and currently it is being used in the production of parts as diverse as medical instruments and bicycle components, however, its applications are growing. The use of stainless steel reinforcement in concrete structures has normally been limited to high risk environments as its use is cost prohibitive. However, MMFX2 steel, while having the mechanical properties of conventional steel, has a modified nano-structure that makes it corrosion resistant and it is an alternative to conventional stainless steel, but widely not accepted due to its high cost.

2.2.3. Applications in Wood
               Wood is also composed of nanotubes or “nanofibrils”; namely, lignocellulosic (woody tissue) elements which are twice as strong as steel. Harvesting these nanofibrils would lead to a new paradigm in sustainable construction as both the production and use would be part of a renewable cycle. Lignocellulosic surfaces at the nanoscale could open new opportunities for such things as self-sterilizing surfaces, internal self-repair, and electronic lignocellulosic devices. Due to its natural origins, wood is leading the way in cross-disciplinary research and modelling techniques. Firstly, BASF have developed a highly water repellent coating based on the actions of the lotus leaf as a result of the incorporation of silica and alumina nano particles and hydrophobic polymers. And, secondly, mechanical studies of bones have been adapted to model wood, for instance in the drying process. In the broader sense, nanotechnology represents a major opportunity for the wood industry to develop new products, substantially reduce processing costs, and open new markets for bio-based materials

2.3. APPLICATIONS IN COATING
                  Coating is an area of significant research in nanotechnology. Much of the work involves Chemical Vapour Deposition (CVD), Dip, Meniscus, Spray and Plasma Coating in order to produce a layer which is bound to the base material to produce a surface of the desired protective or functional properties.
                 Nanotechnology is being applied to paints and insulating properties, produced by the addition of nano-sized cells, pores and particles. This type of paint is used, at present, for corrosion protection under insulation since it is hydrophobic and repels water from the metal pipe and can also protect metal from salt water attack. TiO2 nano particles are also being used in coating material. The TiO2 coating captures and breaks down organic and inorganic air pollutants by a photo catalytic process (a coating of 7000m²of road in Milan gave a 60% reduction in nitrous oxides). TiO2 is used to coat glazing because of its sterilizing and anti-fouling properties. The TiO2 will break down and disintegrate organic dirt through powerful catalytic reaction. Furthermore, it is hydrophilic, which allow the water to spread evenly over the surface and wash away dirt previously broken down. Other special coatings also have been developed, such as anti-fraffiti, thermal control, energy sawing, anti-reflection coating. This research opens up the intriguing possibility of putting roads to good environmental use.
                  Another application is coating of glass materials. The current state of the art in cladding is an active system which tracks sun, wind and rain in order to control the building environment and contribute to sustainability, but this is unreliable and difficult to calibrate and maintain. Consequently, there is a lot of research being carried out on the application of nanotechnology to glass so as to improve its properties. Titanium dioxide (TiO2) is used in nano particle form to coat glazing. Glass incorporating this self cleaning technology increases the efficiency of buildings. Fire-protective glass is another application of nanotechnology. This is achieved by using a clear intumescent layer sandwiched between glass panels (an interlayer) formed of fumed silica (SiO2) nanoparticles which turns into a rigid and opaque fire shield when heated.
                        Most of glass in construction is, of course, on the exterior surface of buildings and the control of light and heat entering through building glazing is a major sustainability issue. Research into nano technological solutions are mainly done to block light and heat coming in through windows. Firstly, thin film coatings are being developed which are spectrally sensitive surface applications for window glass. These have the potential to filter out unwanted infrared frequencies of light (which heat up a room) and reduce the heat gain in building, however, these are effectively a passive solution. As an active solution, thermo chromic technologies are being studied which react to temperature and provide thermal insulation to give protection from heating whilst maintaining adequate lighting. A third strategy, that produces a similar outcome by a different process, involves photochromic technologies which are being studied to react to changes in light intensity by increasing absorption. And finally, electrochromic coatings are being developed that react to changes in applied voltage by using a tungsten oxide layer; thereby becoming more opaque at the touch of a button. All these applications are intended to reduce energy use in cooling buildings and create a sustainable built environment.              .
Fig 2.7. Using TiO2 photocatalytic material as coating  on roadway for pollution reduction: left; right – finished road showing a lighter colour  (From Construction and Building Materials, 25 (2011), 588 )
  
Nanotechnology and fire protection
                     Fire resistance of steel structures is often provided by a coating produced by a spray-on cementitious process. Current portland cement based coatings are not popular because they need to be thick, tend to be brittle and polymer additions are needed to improve adhesion. However, research into nano-cement (made of nano-sized particles) has the potential to create a new paradigm in this area of application because the resulting material can be used as a tough, durable, high temperature coating. This is achieved by the mixing of carbon nanotubes with the cementious material to fabricate fibre composites that can inherit some of the outstanding properties of the nanotubes such as strength. Polypropylene fibres also are being considered as a method of increasing fire resistance and this is a cheaper option than conventional insulation.

2.4. NANOSENSORS
                    Nano and microelectrical mechanical systems (MEMS) sensors have been developed and used in construction to monitor and control the environment condition and the material performance. When embedded into concrete, the sensor system can provide crucial information about the curing process of the cement paste through the sensed temperature and internal humidity. The sensed temperature and internal humidity also can be integrated into available maturity methods to predict the strength of the young concrete . Knowing the strength of concrete at early ages has great benefits such as an increase in the productivity and acceleration of the construction process through the reduction of the formwork structure removal period, and an increase in the productivity of prefabricated elements and pre-stressing concrete members. When a concrete structure is in service, continuous monitoring of temperature and internal humidity will provide information about the damage process of the concrete structure due to environmental effects such as freeze/thaw cycles, chloride diffusion, alkali-silica reaction, carbonation and dimensional changes caused by temperature changes.
                  MEMS devices are being manufactured using the same materials and processes as microelectronic devices such as microprocessors and memory chips.   There are several advantages of a MEMS-based monitoring system over other methods of condition assessment and monitoring. MEMS devices can be embedded, bringing their readings closer to the true in situ properties of the structure and not estimates based on external visual inspections or expensive non-destructive tests. MEMS technology has the potential to measure the properties of interest directly. Batch processes are used to fabricate MEMS devices, introducing high quantity, low cost and ensuring good coverage of a structure. Finally, MEMS devices are robust and bring improved ease of use. Their small, encapsulated nature makes them difficult to damage while wireless technologies make them easy to embed and interrogate. MEMS-based systems for distributed infrastructure monitoring will have integratable technologies for sensing, powering, wireless communication, device location, computation, interrogation, storage, and data analysis for condition assessment.
                   One advantage of these sensors is their dimension. Nanosensor ranges from 1 nm to 10000 nm. These sensors could be embedded into the structure during the construction process. Smart aggregate, a low cost piezoceramic-based multi-functional device, has been applied to monitor early age concrete properties such as moisture, temperature, relative humidity and early age strength development. The sensors can also be used to monitor concrete corrosion and cracking. The smart aggregate can also be used for structure health monitoring. The disclosed system can monitor internal stresses, cracks and other physical forces in the structures during the structures' life. It is capable of providing an early indication of the health of the structure before a failure of the structure can occur.

Fig  2.8. Manufactured MEMS chip

              (from Construction and Building Materials, 22 (2008), 116)
        
             The use of processors in fire detection systems which are built into each detector head is fairly well established these days. These improve relaibility allowing better addressability and the ability to identify false alarms. The use of nanotechnology in the future through the development of nano-electromechanical systems (NEMS) could see whole buildings become networked detectors, as such devices are embedded either into elements or surfaces.


 3. FUTURE CHALLENGES AND DIRECTIONS
              
                 As with most developing technologies, a major number of challenges exit during the initiation of the application of technology into reality. It is important to be realistic and identify and plan for the limitations and challenges inherent in this technology. The challenges and limitations affecting applications of nanotechnology in construction engineering are therefore considered and studied with great importance.

3.1 FABRICATION
                Current efforts in the field of nanotechnology are focussed on the fabrication, characterization and use of these materials on a nano scale domain. This leads to most of the developmental work focussing on very small quantities of material that is typically far removed from the type of quantities required for typical construction infrastructure. One of the potential solutions to this is to focus on the nano materials to act as catalyser, thereby reducing the amount of nanomaterials required substantially. Another viewpoint is that for many applications, the material does not necessarily have to be used on a nano scale to obtain a major improvement in benefits. This would be the case with reduction of the dimensions of cement, where a substantial improvement in strength can already be obtained through the large scale milling of the cement to a finer form than traditional form. Although the cement may not be purely a nanomaterial as yet, the benefits obtained would already be substantial.             

3.2 HEALTH
                Nanotechnology based construction products might be harmful to health. The use of nanoparticles is very recent, it has already raised issues concerning its potential toxicity.For example, the nanotubes might cause lung problems to the workers as nanoparticles can cause symptoms like the ones caused by asbestos fibers. The effects related to the inhalation of TiO2 particles with a primary particle size between 2 and 5 nm, reporting lung inflammation for a concentration of 8.8 mg/m³. These symptoms have been confirmed and it is recommended that the use of nanoparticles should be made with the same care already used in Universities for materials of unknown toxicity, i.e., by using air extraction devices to prevent inhalation and gloves to prevent dermal contact. The possibility of DNA damage resulting in later cancer development. The nanotoxicity risk depends on the nanoparticles type, concentration volume superficial characteristics

3.3 ENVIRONMENT
                The effect of various nanomaterials on the natural environment is hotly debated in nanotechnology and environmental research. Various ongoing investigations focus on the uncertainty regarding the potentials effects of materials that can exist on the nanoscale with properties that are different that when using the material on micro or macroscale. Some works in this regard shows that the potential effects may be minimal. As constructed infrastructure is provided in the natural environment, all materials used in the construction and maintenance of these facilities need to be compatible to the natural environment and their effects on the natural environment should not be negative. Typical potential problems in this regard include leaching of minerals into ground water, release of minerals into airways through the generation of dust and exposure to potentially harmful materials during construction and maintenance operations. . The Environment Protection Agency has considered that carbon nanotubes are a new form of carbon that must be treated under the toxic products Act. Moreover it will create a new category of nanowaste which has to be  extracted and treated. The nanotechnology becomes a double edge sword to the construction industry. More research and practice efforts are needed with smart design and planning, construction projects can be made sustainable and therefore save energy, reduce resource usage, and avoid damages to the environment.

3.4. COST
              The cost of most nanotechnology materials and equipment are relatively high. This is due to the novelty of the technology and the complexity of the equipment used for preparation and characterization of the materials. However, costs have been shown to decrease over time and the expectations are that, as manufacturing technologies improve, these costs may further decrease. Whether the expected decrease will render the materials as run-of-the-mill construction engineering materials will have to be seen, and depends largely on the benefits rendered through the applications of these materials. Current option is that in special cases, the materials will unable unique solutions to complicated problems that cause them to be cost effective, which will lead to large scale application of these specific technologies. In other cases the traditional methods for treating the problem may still remain the most cost effective. It’s is a challenge for construction engineer to solve real world transportation infrastructure problem and provide a facility to the general public at a reasonable cost.
     


4. CONCLUSION
            
                      Nanotechnology offers the possibility of great advances whereas conventional approaches, at best, offer only incremental improvements in the field of construction engineering. Nanotechnology is not exactly a new technology, rather it is an extrapolation of current ones to a new scale and at that scale the conventional tools and rules no longer apply. Nanotechnology is therefore the opposite of the traditional top-down process of construction, or indeed any production technique, and it offers the ability to work from the “bottom” of materials design to the “top” of the built environment. However, many of the advances offered by nanotechnology, be they for economic or technical reasons, are years away from practical application, especially in the conservative and fragmented construction business. The main limitation is the high costs of nanotechnology, also concerns with the environmental and health effects. The waves of change being propagated by progress at the nanoscale will therefore be felt far and wide and nowhere more so than in construction due its large economic and social presence. There are three main issues that are preventing the widespread use of the nanotechnology (1) Lack of vision to identify those aspects that could be changed through its use, (2) Lack of skilled personnel and (3) Level of investment.  The potential of nanotechnology to improve the performance of concrete and to lead to the development of novel, sustainable, advanced cement based composites with unique mechanical, thermal, and electrical properties is promising and many new opportunities are expected to arise in the coming years. However, current challenges need to be solved before the full potential of nanotechnology can be realized in concrete applications, including proper dispersion; compatibility of the nanomaterials in cement; processing, manufacturing, safety, and handling issues; scale-up; and cost.
  
                           
REFERENCE

1.   Ashley Norris , Mohammed Saafi , Peter Romine (2008) Temperature and
      Moisture monitoring in concrete structures using embedded nanotechnology/
       Microelectromechanical systems (MEMS) sensors, Construction and Building
      Materials, 22, 111-120
2.   Ashwani K. Rana and Shashi B Rana (2011) Significance of Nanotechnology in    
      Construction Engineering, Civil Engineering & Construction Review, 78-84
 3.  Florence Sanchez and Konstantin Sobolev (2010) Nanotechnology in concrete-
      A review, Construction and Building Materials, 24, 2060-2071
4.   Pacheco-Torgal .F and Said Jalali (2011) Nanotechnology: Advantages and
      Drawbacks in the field of construction and building materials, Construction and
      Building Materials, 25, 582-590

Thursday, September 15, 2011

DRIP IRRIGATION



                                                                   CHAPTER 1
INTRODUCTION
1.1    GENERAL
Irrigation may be defined as the process of supplying water to land by artificial means for the purpose of cultivation.Ordinarily water is supplied to land by nature through rain but generally it is not enough for the proper growth of plants.As such as the basic objective of irrigation is to supplement the natural supply of water to land so as to obtain the an optimum yield from the crop grown on the land.
In order to achieve this objective of irrigation, an irrigation system is required to developed, which involves planning, designing, construction, operation and maintenance of various irrigation works viz, a source of water supply, a distribution system for carrying water from the source to the agricultural land and its application on the land, and various other associated works.The factors which neccessitate irrigation are:
Ø  Inadequate rainfall
Ø  Uneven distribution of rainfall
Ø  Growing a number of crops during a year
Ø  Growing superior crops
1.2 METHODS OF IRRIGATION
Irrigation methods are commonly designated according to the manner in which water is applied to the land to be irrigated.
1.2.1 Surface  Irrigation Methods
The water is applied by spreading in it sheets or small streams on the land to be irrigated.These methods are adopted for perennial irrigation system.
1.2.2 Sprinkler Irrigation Methods
The irrigation water is applied to the land in the form of spray, somewhat as in ordinary rain.It can be used for all the crops except rice and jute and for almost all soils except very heavy soils with very low filtration rates.
1.2.3 Sub-Surface Irrigation Methods
The water is applied below the ground surface so that it is supplied directly to the root zone of the plants.The main advantages of these methods are that the evaporation losses are considerably reduced and the hindrance caused to cultivation by the presence of borders, pipes and field channels in the other methods of irrigation is eliminated.
1.3 DRIP OR TRICKLE IRRIGATION METHOD
Drip irrigation,also known as trickle irrigation or microirrigation is one of the sub-surface irrigation method of applying water or frequent application of water to crops through small emitters in the vicinity of the root zone, wetting a limited amount of surface area and depth of soil. The theory behind drip irrigation is to apply sufficient moisture to the root of the crops to prevent water stress. A major difference between drip system and most other systems is that the balance between crop evapotranspiration and applied water is maintained over limited periods of 24 to 72 hours. The conversion from sprinkler to drip irrigation can result in water use reduction of 50% and double yield. This is a result of improved water use and fertility and reduced disease and weed pressure.
1.4  NEED OF DRIP IRRIGATION
Drip irrigation can help you use water efficiently.A well-designed drip irrigation system loses practically no water to runoff, deep percolation, or evaporation. Drip irrigation reduces water contact with crop leaves, stems, and fruit. Thus conditions may be less favorable for the onset of diseases. Irrigation scheduling can be managed precisely to meet crop demands, holding the promise of increased yield and quality.Growers and irrigation professionals often refer to "subsurface drip irrigation,"or SDI. When a drip tape or tube is buried below the soil surface, it is less vulnerable to damage during cultivation or weeding. With SDI, water use efficiency is maximized because there is even less evaporation or runoff.Agricultural chemicals can be applied more efficiently with drip irrigation. Since only the crop root zone is irrigated, nitrogen already in the soil is less subject to leaching losses, and applied fertilizer N can be used more efficiently. In the case of insecticides, less product might be needed.


CHAPTER 2
COMPONENTS AND WORKING
In drip irrigation, also known as trickle irrigation, water is applied in the form of drops directly near the base of the plant. Water is conveyed through a system of flexible pipelines, operating at low pressure, and is applied to the plants through drip nozzles.  This technique is also known as ‘feeding bottle’ technique where by the soil is maintained in the most congenital form by keeping the soil-water-air proportions in the optimum range. Drip irrigation limits the water supplied for consumptive use of the plant by maintaining minimum soil moisture, equal to the field capacity, thereby maximizing the saving. The system permits the fine control on the application of moisture and nutrients at stated frequencies.
Fig 2.1 Drip Irrigation System Layout and its parts (Credits:Eric Simonne)

The main components of a typical drip irrigation system are:
Ø  Water Source
Ø  Pumping System
Ø  Distribution System
Ø  Drip Tape ( Drip Tube)
Ø  Injectors
Ø  Filtration System
2.1 WATER SOURCE
Common water sources for drip irrigation are surface water (pond, river, and creek), groundwater, and potable water (from municipality, county orutility company). Use the water source thatwill provide the largest amount of water of greatestquality and lowest cost. Potable water is of high,constant quality, but is by far the most expensive.
Fig 2.2  Pond: Water Source (Credits:Eric Simonne)

2.2 PUMPING SYSTEM
The role of the pumping system is to move waterfrom the water source to the field through the distribution system. Pumping systems may be classified as electric powered systems, gas/diesel powered systems, and gravity systems.Gas/diesel pumps offer the greatest versatility in isolated fields.
Fig 2.3  Diesel Powered Pumping System (Credits:Eric Simonne)

2.3 DISTRIBUTION SYSTEM
The role of the distribution system is to convey the water from the source to the field. Distribution systems may be above ground (easily movable) or underground (less likely to be damaged).Pipes are most commonly made of PVC or polyethylene plastics.Aluminum pipes are also available, but are more difficult to customize, cut, and repair.The size and shape of the distribution system may vary widely from field to field and from farm to farm.

2.4 DRIP TAPE (OR DRIP TUBE)
The drip-irrigation system delivers water to each plant through a thin polyethylene tape (or tube) with regularly spaced small holes (called emitters). Selection of drip tape should be based on emitter spacing and flow rate. The typical emitter spacing for vegetables is 12 inches, but 8 inches or 4 inches may be acceptable. Dry sections of soil may develop between consecutive emitters when a wider emitter spacing (18 inches) is used on sandy soils. Flow rates are classified into low flow (<20gal/100ft/hr), medium flow (20 to 30 gal/100ft/hr) and high flow(>30 gal/100ft/hr). The risk of emitter clogging is generally higher with the lower-flow drip tapes.In the field, drip-irrigation tape should be installed with emitters upward (looking up) to prevent clogging from sediment deposits settling in the emitters between irrigation events. Drip tapes are widely available from several manufacturers.
Fig 2.4  Drip Tapes (Credits:Eric Simonne)

2.5 INJECTORS
Injectors allow the introduction of fertilizer, chemicals and maintenance products into the irrigation system. Florida law requires the use of an anti-siphoning device (also called backflow-prevention device) when fertilizer, chemicals or any other products are injected into a drip-irrigation system.Backflow-prevention devices ensure the water always moves from the water source to the field. The devices prevent chemicals in the water from polluting the water source. The most common injectors used with smalldrip-irrigation systems are the Venturi (or Mazzei) injector and the Dosatron.Because Venturi injectors involve no moving parts and are less expensive, they are commonly used on small farms. The injector is typically located as close as possible to the irrigation zone, but before the filter.
Fig 2.5  Venturi Injector (Credits:Eric Simonne)

Fig 2.6  Dosatron Injector (Credits:Eric Simonne)

2.6 FILTRATION SYSTEM
Because drip-irrigation water must pass through the emitters, the size of the particles in the water must be smaller than the size of the emitter to prevent clogging. Nearly all manufacturers of drip-irrigation equipment recommend that filters be used. The filtration system removes "large" solid particles in suspension in the water. Different types of filters are used based on the type of particles in the water. Media filters (often containing angular sand) are used with surface water when large amounts of organic matter (live or dead) need to be filtered out. Screen filters or disk filters may be used withgroundwater. A 200-mesh screen or equivalent is considered adequate
for drip irrigation.When the water contains sand, a sand separator should be used. Rapid clogging may occur when no filter or the incorrect type of filter is used. A filter needs to be cleaned when the difference in pressure across the R filter (measured before and after the filter) is greater than 5 - 8 psi. A drip-irrigation system should never be operated without a filter even if the filter requires clogged drip-tape emitters, often resulting in poor uniformity and sometimes in crop loss. The filter should be cleaned as often as needed. Efforts should be made to understand the cause of the rapid clogging, and remediation for the problem should bdeveloped. The presence of the filter after the point of fertilizer injection means totally soluble fertilizers must be used. Otherwise fertilizer particles may contribute to filter clogging.
F ig 2.7  Disk filters (Credits:Eric Simonne)

The whole field is divided into suitable plots. A secondary line is provided for each such plot, and a number of trickle lines are connected to each secondary line. A discharge regulator is provided at the beginning of each secondary line, and its capacity is fixed in accordance with the size and the number of nozzles used. The automatic valve at the head is so adjusted to deliver the desired quantity of water and the irrigation terminates automatically after this amount is discharged.

CHAPTER 3
DESIGN AND LAYOUT
3.1 HOLTICULTURAL CONSIDERATIONS
The goal of drip irrigation is to bring water to the crop. The main parameters that determine crop water use are the type of crop planted and row spacing. A drip irrigation system should be able to supply 110% - 120% of crop water needs. In other words, the system should be slightly oversized. In designing a drip-irrigation system, it is common to consider that vegetable crops ordinarily need approximately 1.5 acre-inches of water for each week of growth or approximately 20 acre-inches of water per crop. Actual crop water use will be more or less than this amount, depending on weather and irrigation efficiency.

3.2 DESIGN CONSIDERATIONS

Start with what is already available, the water source or the field. If a water source is already available (pond or well), the amount of water available may be used to calculate the maximum size of each irrigation zone.
If no water source is available, the amount of water needed by the crop, based on the size of the planted area, may be used to calculate the type of well or pond size needed.

3.3 LAY OUT OF BEDS AND ROWS

Because differences in altitudes affect water pressure, it is preferable to lay out beds perpendicular to the slope. This arrangement of rows is called "contour farming”.
Fig 3.1  Layout of Beds and Rows (Credits:Eric Simonne)

Excessive water velocities (>5 feet/second) in the lines, the result of a too-small diameter are likely to create a water hammer (pressure wave), which can damage the delivery lines. Growers should be aware of the maximum acreage that can be
irrigated with different pipe sizes at a water velocity of 5 feet/second.
The maximum length of drip tape should be based on the manufacturer's recommendation and the actual terrain slope. Typically 400 - 600 feet are
maximum values for drip-tape length. Excessive length of laterals will result in poor uniformity and uneven water application. When the field is longerthan 400 - 600 feet, consider placing the secondary (submain) line in the middle of the field  rather than at the end  and connect drip tape on both sides.

Table 3.1  Maximum length of drip tape (feet) and maximum irrigatable field size (acre) with low- and medium-flow drip tape at awater velocity of 5-feet-per-second    for selected diameters of Class 160 PVC pipes


CHAPTER 4
SYSTEM CONTROLS

System controls are devices that allow the user to monitor how the drip-irrigation system performs. These controls help ensure the desired amount ofwater is applied to the crop throughout the growing season.The different devices used for the control are:
Ø  Pressure Regulators
Ø  Water Meters
Ø  Pressure Gauges
Ø  Soil moisture Measuring Devices
Ø  Electrical Timers
4.1 PRESSURE REGULATORS
Pressure regulators,installed in-line with the system, regulate water pressure at a given water flow there by helping to protect system components against damaging surges in water pressure. Pressure surges may occur when the water in the pipe has a velocity >5 feet /second ("water hammer") or when water flowing in the pipe has no avenue for release due to a closed valve or a clog inthe pipe.
Fig 4.1  Pressure Regulators (Credits:Eric Simonne)

4.2 WATER METERS
Water meters monitor and record the amount of water moving through a pipe where the water meter is installed. When a stopwatch is used together with a water meter, it is possible to determine the water flow in the system in terms of gallons-per-minute.

Fig 4.2 Water meters installed near the field (Credits:Eric Simonne)

4.3 PRESSURE GAUGES
Pressure gauges monitor water pressure in the system and ensure operating pressure remains close to the recommended or benchmark values. Based on where the pressure gauge is installed, it will measure water pressure in a various ranges, from 0-100 psi near the pump to 0-20 psi at the end of drip tape.Pressure gauges may be installed at set points (near the pump, before and after the filter, near the Field.They can also be mounted as portable devices and installed temporarily at the end.

4.4 SOIL MOISTURE MEASURING DEVICES
Soil-moisture-measuring devices (such as tensiometers, capacitance probes or Time Domain Reflectometry probes) are used to measure soil moisture in the root zone of the crop.

4.5 ELECTRICAL TIMERS
Electrical timers connected to solenoid valves  may be used to automatically operate a drip-irrigation system at pre-set starting and ending operating times of day.
Fig 4.3  Portable Pressure Gauge (Credits:Eric Simonne)
Fig 4.4  Electrical Timer (Credits:Eric Simonne)  

CHAPTER 5
SYSTEM MAINTENENCE

The goal of drip-irrigation maintenance is to preserve the high uniformity of water application  allowed by drip irrigation. A successful program of maintenance for a drip-irrigation system is based on the prevention-is-the-best-medicine approach. It is
easier to prevent a drip tape from clogging than to"unclog" it or replace it.

5.1 WATER SAMPLING

An essential part of drip-irrigation management is determining water quality through water testing. Water testing will help determine water chemical composition, pH, and hardness.These parameters have direct implications on chlorination, acidification and filtration needs for irrigation water.

Table 5.1  Water quality parameter levels for emitter plugging potential of
                           Drip  irrigation systems



5.2 THE PREVENTION IS THE BEST MEDICINE MAINTENANCE  PROGRAM

This maintenance program is based on filtration, chlorination/acidification, flushing and observation.

Table 5.2  Components of the “prevention is the best medicine” maintanence plan


5.3 WATCH FOR LEAKS
Leaks can occur unexpectedly as a result of damage by insects, animals, or farming tools. Systematically monitor the lines for physical damage. It is important to fix holes as soon as possible to prevent uneven irrigation.

5.4 CHLORINE CLEARS CLOGGED EMITTERS
If the rate of water flow progressively declines during the season, the tubes or tape may be slowly plugging, resulting in severe damage to the crop. In addition to maintaining the filtering stations, regular flushing of the drip tube and application of chlorine through the drip tube will help minimize clogs. Once a month, flush the drip lines by opening the far ends of a portion of the tubes at a time and allowing the higher velocity water to rush out the sediment.Because algae growth and biological activity in the tube or tape are especially high during warmer months,chlorine usually is applied at 2-week intervals during these months.
5.4 CHEMIGATION
Manage irrigation and fertilization together to optimize efficiency. Chemigation through drip systems efficiently delivers chemicals in the root zone of the receiving plants. Because of the precision of application, chemigation can be safer and use less material.

5.5 FERTILIZATION
Soil microorganisms convert nitrogen (N) fertilizers to nitrate. Nitrate is water soluble, available to plants, and subject to leaching loss.Fertilizer can be injected through the drip system. Fertilizer usually is introduced into the irrigation system in front of the filter station so the filters can remove any precipitates that occur in the solution Fertilizers containing sulfate, phosphate, calcium, or anhydrous or aqua ammonium can lead to solid chemical precipitation inside the drip lines, which can block emitters.
5.6 PLACEMENT OF TAPE
The drip tape must be close enough to the surface to germinate the seed if necessary, or a portable sprinkler system should be available. For example, a tape tube 4 to 5 inches deep has successfully germinated onion seeds in silt loam soil. Tape at 12 inches failed to uniformly germinate onions.
5.8 TIMING AND RATES
The total irrigation water requirements for crops grown with a drip system is greatly reduced compared to a surface flood system because water can be applied much more efficiently with drip irrigation. For example, with furrow irrigation, typically at least 4 acre-feet/acre/year of water is applied to onion fields in the Treasure Valley of eastern Oregon and southwestern Idaho. Depending on the year, summer rainfall, and the soil, 14 to 32 acre-inches/acre of water has been needed to raise onions under drip irrigation in the Treasure Valley. 


5.9 STANDARD MAINTENANCE
Add chlorine or other chemicals to the drip line periodically to kill bacteria and algae. Acid might also be needed to dissolve calcium carbonates. Filters must be managed and changed as needed. Even with filtration, however, drip tape must be flushed regularly. The frequency of flushing depends on the amount and kinds of sedimentation in the tape.

CHAPTER 6
ADVANTAGES AND DISADVANTAGES OF DRIP IRRIGATION
6.1 ADVANTAGES

6.1.1 Reduced water use
Because drip irrigation brings the water to the plant root zone and does not wet the entire field, drip irrigation typically requires half to a quarter of the volume of water required by comparable overhead-irrigation systems.

6.1.2 Joint management of irrigation and Fertilization
Drip irrigation can improve the efficiency of both water and fertilizer. Precise
application of nutrients is possible using drip irrigation. Hence, fertilizer costs and soluble nutrient losses may be reduced with drip irrigation. Nutrient applications may also be better timed to meet plant needs.

6.1.3 Reduced pest problems
Weed and  diseaseproblems may be reduced because drip irrigation does not wet the row middles or the foliage of the crops as does overhead irrigation.

6.1.4 Simplicity
Polyvinyl chloride (pvc) andpolyethylene parts are widely available in several diameters and are easy to assemble. Many customized, easy-to-install connectors, endcaps, and couplers are available in different diameters. Cutting and gluing allows for  timely repairs.

6.1.5 Low pumping needs
Drip systems require low operating pressure (20-25 psi at field entrance, 10-12 psi at the drip tape) compared to overhead systems (50-80 psi). Many existing small pumps and wells may be used to adequately irrigate small acreage using drip systems.



6.1.6 Automation
Drip-irrigation application may be simply managed and programmed with an AC- or battery-powered controller, thereby reducing labor cost.

6.1.7 Adaptation
Drip systems are adaptable to oddly shaped fields or those with uneven topography
or soil texture, thereby eliminating the underutilized or non-cropped corners and maximizing the use of available land.

6.1.8 Production advantages
Combined with raised beds, polyethylene mulch, and transplants, drip irrigation enhances earliness and crop uniformity. Using polyethylene mulch also increases the
cleanliness of harvested products and reduces the risk of contamination with soil-born pathogens. Reflective mulches further help reduce the incidence of viral diseases by affecting insect vectors, such as thrips, whiteflies or aphids.



6.2 DISADVANTAGES

6.2.1 Drip irrigation requires an economic Investment
Drip-irrigation systems typically cost $500 - $1,200 or more per acre (Table 1). Part of the cost is a capital investment useful for several years, and another part is due to the annual cost of disposable parts. Growers new to drip irrigation should start with a relatively simple system on a small acreage before moving to a larger system.

6.2.2 Drip irrigation requires maintenance and high-quality water
Once emitters are clogged or the tape is damaged, the tape must be replaced. Water
dripping from an emitter and the subsequent wetting pattern are hard to see, which makes it difficult to know if the system is working properly. Proper management of drip irrigation requires a learning period.

6.2.3 Water-application pattern must match planting pattern
If emitter spacing (too far apart) does not match the planting pattern, root development may be restricted and/or plants may die.

6.2.4 Safety
Drip tubing may be lifted by wind or may be displaced by animals unless the drip tape is covered with mulch, fastened with wire anchor pins,or lightly covered with soil.

6.2.5 Leak repair
Drip lines can be easily cut or damaged by other farming operations, such as tilling, transplanting, or manual weeding with a hoe. Damage to drip tape caused by insects, rodents or birds may create large leaks that also require repair.

6.2.6 Drip-tape disposal causes extra cleanup costs after harvest
Planning is needed for drip-tapedisposal, recycling or reuse.



CHAPTER 7
APPLICATIONS OF DRIP IRRIGATION

  •      Drip irrigation is used by farms, commercial greenhouses and residential gardeners.
Fig 7.1 Drip irrigation for crops production

  •  For cultivation in roof gardens
Fig 7.2 Drip irrigation in roof gardens

  •        In shopping malls and embankments
Fig 7.3  Drip irrigation in embankments

  •         In steep slopes
F ig 7.4  Drip irrigation in steep slopes

CONCLUSIONS
Drip irrigation is a latest sub-surface methods of irrigating water with higher water demands in arid region.It may not be applicable to all farms.Yet, when properly designed, installed and managed, drip irrigation may help achieve water conservation by reducing evaporation and deep drainage when compared to other types of irrigation such as flood or overhead sprinklers since water can be more precisely applied to the plant roots.In addition, drip can eliminate many diseases that are spread through water contact with the foliage.It also results reduced energy costs.


REFERENCES
   1.     Eric Simonne, Robert Hochmuth, Jacque Breman, William Lamont, Danielle  Treadwell and Aparna Gazula ( June 2008), Drip Irrigation System for Small Conventional Vegetable Farms and Organic Vegetable Farms, Horticultural Sciences Department, Florida Co-operative Extension Service, Institute of Food and Agricultural Sciences, University of Florida, HS 1144.
    2.     Shock.C.C (August 2006, June 2001), Drip Irrigation: An Introduction, Malheur Experiment Station, Oregon State University, EM 8782.
    3.     Modi.P.N (2008), Irrigation Water Resources and Water Power Engineering, Standard Book House, Rajsons Publications Pvt.Ltd,1705-A, Nai Sarak, New Delhi-110 006.





\

GET FREE BOOKS

GET FREE BOOKS